Crestron
ML-500
Mini LCD RF Wireless Handheld Remote
When viewing any of the five “FAV” pages, pressing a soft key will cause the
control system to perform the function assigned to the corresponding “FAV” button
press. Each soft key can be assigned a five-character length label in VT Pro-e to
provide a descriptive name to the assigned function. Additionally, a jump to a page
within a Grp group can be assigned to a FAV button press.
ML-500 Digital Output Signal Descriptions for “FAV” Presses
OUTPUT DESCRIPTION
FAV_1 through FAV_50
Goes high when the corresponding FAV button is
pressed.
NOTE:
FAV
button presses will send a momentary signal pulse regardless of how
long a button is held.
Select_Grp Button Presses
When viewing the MAIN page, a user can select one of (up to) ten Grp groups by
pressing any of the soft keys flanking the LCD (Select_Grp1 through Select_Grp10).
The soft keys can be labeled in VT Pro-e to describe specific devices, rooms, etc.
ML-500 Digital Output Signal Descriptions for “Select_Grp” Presses
BUTTON PRESS
OUTPUT
DESCRIPTION
Select_Grp1 through
Select_Grp10
Goes high when a Select_Grp
button is pressed. A button press
also sets the hard keys to operate
under the selected Grp group.
Additionally, the LCD display will
jump to the first page of the
selected Grp group.
1
2
3
4
5
6
7
8
9
10
Pressing a soft key will change the LCD to show the first page of up to 40
programmed soft key commands within the
Grp group
as shown in the following
diagram.
Pressing a Select_Grp Softkey
NOTE:
Select_Grp
button presses will send a momentary signal pulse regardless of
how long a button is held.
After a Select_Grp button has been pressed, all of the hard keys will operate as
programmed for the selected Grp group. For descriptions of each hard key, refer to
“Hard Key Button Presses”.
Programming Guide – DOC. 6263
Mini LCD RF Wireless Handheld Remote: ML-500
•
11