Crestron Mercury CCS-UC-1 Product Manual Download Page 9

Page: 9 / 108

Product Manual – DOC. 7844M

CCS-UC-1: Crestron Mercury Tabletop Conference System

•

−

Click General to view general information.

−

Click Network to view network information.

•

HDMI INPUT configures the HDMI® input.

•

HDMI OUTPUT displays information about the HDMI output.

NOTE:

On the CCS-UC-1-X, this screen is called HDBT OUTPUT and provides

information about the HDBaseT® output.

•

NETWORK configures the device for operation in a network environment.

•

DEVICE is used to upload firmware, reboot the device, view the system log,

enable connection to Crestron XiO Cloud service, configure SIP calling

parameters, set the date and time, configure for use with Skype® for Business

software, authentication management, and setting the device to work with

Zoom Rooms™ software.

•

APPSPACE is used to configure the device to work with the Appspace® content

management application for digital signage.

•

AVF configures the settings for Crestron Fusion integration, power management,

dialing features, video display, touch screen and display functionality, and system

logs.

•

AIRMEDIA configures the device’s AirMedia® presentation gateway functionality.

•

AIRBOARD configures the device’s functionality with the CCS-WB-1 Crestron

AirBoard™ whiteboard capture system.

Log Out from the Device

To log out from the device and return to the welcome screen, click .

Configure the Device

Configure the device as required for the installation.

HDMI INPUT

Click HDMI INPUT to configure the HDMI input. The screen displays a selector for HDCP

support, Extended Display Identification Data (EDID) profile selection, and information

about the input signal (if present).

Summary of Contents for Mercury CCS-UC-1













































































































Search results

Summary of Contents for Mercury CCS-UC-1

Reviews:

Related manuals for Mercury CCS-UC-1

Brands by name

Popular brands

Crestron Mercury CCS-UC-1, Product Manual

Search results

Summary of Contents for Mercury CCS-UC-1

Reviews:

Related manuals for Mercury CCS-UC-1

Brands by name

Popular brands