Crestron
TPS-6
Isys™ 5.7” Tilt Touchpanel
When all settings have been entered, touch
RETURN
to go back to the main
ETHERNET SETUP menu and touch
Reboot required for setting to take effect.
Reboot Now
.
After communications parameters have been set, touch
RETURN
to go back to the
SETUP MODE menu or MAIN MENU.
TOUCH PANEL
From the SETUP MODE menu, touch the
TOUCH PANEL
button to enter the
TOUCHPANEL menu.
TOUCHPANEL Menu
The TOUCHPANEL menu offers access to BACKLIGHT SETUP and GRAPHICS
SETUP menus as well as pairs of
–
and
+
controls to set the
Button Backlight
Timeout
and
Standby Timeout
.
The
Restore Default Settings
button will reset the Timeout and Brightness settings to
their factory configuration.
When enabled,
System Messages
will display gateway or control system disconnect
warnings.
When enabled,
Display on from Hardkey
causes the display to turn on along with the
touchpanel at the press of any key on the front of the touchpanel.
Operations Guide – DOC. 6945A
Isys™ 5.7” Tilt Touchpanel: TPS-6
•
23
Summary of Contents for Isys TPS-6
Page 1: ...Crestron TPS 6 Isys 5 7 TiltTouchpanel Operations Guide...
Page 4: ......