Crestron
TPMC-8T
Isys i/O™ 8.4” TableTop WiFi Touchpanel
WiFi Status Details
The
WiFi Status
section of the setup menu contains a bar graph showing the strength
of the WiFi signal as well as an indicator to show when the TPMC-8T is
communicating with a wireless access point (WAP). SSID, BSSID, IP and MAC
addresses are also shown.
Docking Station Status Details
The
Docking Station Status
section of the setup menu has two indicators:
Docked
Status
will always be lit and
Link Status
shows when it is connected to Ethernet via
the docking station. IP and MAC addresses are also shown.
The
Release
button is not applicable to the TPMC-8T and is not used. The
Configure
button will open the “Wallmount Docking Station Setup” window, which
is not applicable to the TPMC-8T and is not used.
Save & Reboot and Shut Down Details
To save any changes and reboot the touchpanel, touch
Save & Reboot
, located in the
lower right section of the setup menu.
To turn off the touchpanel, touch
Shut Down
, located in the lower right section of
the setup menu. This is the recommended method for shutting down the touchpanel.
After the touchpanel has shut down, the power supply can be safely removed from
the touchpanel.
Exit Details
Touch
Exit
to leave the setup menu and return to the project. If no project has been
loaded, the touchpanel will display an error message and return to the setup menu.
Operations Guide – DOC. 6567C
Isys i/O™ 8.4” TableTop WiFi Touchpanel: TPMC-8T
•
43
