28 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
l
Resolution: In the Resolution drop-down list, select the desired resolution of the HDMI
output from the following available resolution settings. By default, the Resolution is set to
Auto (Recommended).
o
Auto (Recommended)
o
720p50
o
720p60
o
1080i25
o
1080i30
o
1080p30
o
1080p24
o
1080p25
o
1080p50
o
1080p60
o
3840x2160@24
o
3840x2160@25
o
3840x2160@30
o
4096x2160@24
o
4096x2160@25
o
4096x2160@30
o
3840x2160@50
o
3840x2160@60
o
4096x2160@50
o
4096x2160@60
l
HDCP Transmitter Mode: Select the desired option from the HDCP Transmitter Mode
drop-down list:
o
Auto (Default): When non-HDCP content is routed, the content will pass through
and not be authenticated until HDCP content is routed. When HDCP content is
routed, the scaler will latch onto the highest HDCP level supported by the
downstream device. The scaler will not attempt to reauthenticate unless hot-
plugged or the downstream device HDCP support level changes.
o
Follow Input: Authenticates each time the input sync changes it state. The output
will authenticate to the level reported at the input.
o
Always: Authenticates to and keeps synced with the highest level HDCP supported
by the downstream device.
o
Never: The HDMI output will blank if the input is HDCP encrypted.