12 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
Input Name
l
Sync detected: Yes, if connection is detected or No, if connection is not detected.
l
Resolution: Resolution when video with valid resolution is detected. If no video is detected,
the reported resolution will be 0x0@0.
l
Source HDCP: Reports Active when HDCP source is connected. Reports Inactive when non-
HDCP source or no source is connected.
Output
l
Sink Connected: Yes, if connection is detected or No, if connection is not detected.
l
Resolution:
o
Displays 0x0@0 when the video signal is not being transmitted. For example, no
HDMI cable is connected.
o
Displays detected resolution when video signal is being transmitted. In the event an
HDMI cable is connected to the display/downstream device, but the device is turned
off, the last detected resolution will be displayed until a new video signal is received.
l
Disabled by HDCP: Yes or No.
NOTE:
As the sources, transmitters and sink are connected or disconnected, information is
updated in real time without requiring a page refresh.
Network
The Network section displays network-related information about the HD-RX-4K-x10-C-E(-SW4),
including the Hostname, Domainname, and DNS Servers.
NOTE:
By default the host name of HD-RX-4K-x10-C-E(-SW4) consists of the model name
followed by the MAC address of the device. For example, HD-RX-4K-510-C-E-C4C138FFFF29.
Additionally, the following IPv4 addressing information is provided:
l
DHCP Enabled: (Yes or No)
l
IP Address