Web Interface Configuration Guide — Doc. 9196B
HD-PS401 and HD-PS402 • 29
Date/Time
Use the Date/Time section to configure the date and time settings of the Presentation System.
Time Synchronization
1. Move the Time Synchronization slider to specify whether time synchronization will be
enabled (right) or disabled (left). By default, time synchronization is enabled.
2. In the NTP Time Servers, enter the URL of the NTP or SNTP server.
If you choose to synchronize with NTP time servers, you can synchronize with up to two
NTP servers. For each sever, the following configuration inputs are required:
l
IP address or DNS name of NTP server
l
Network port of NTP server (default to 123)
l
Authentication method (None, MD5, or SHA1) (Default is None)
l
If authentication is set to MD5 or SHA1, an authentication key must be entered.
3. Click Synchronize Now to perform time synchronization between the device's internal
clock and the time server.
Time Configuration
1. Click on the Time Zone drop-down menu to select the applicable time zone.
2. In the Date field, enter the current date.
3. In the Time (24hr Format) field, enter the current time in 24-hour format.
Click the Save Changes button to save the settings.
Click the Revert button to revert to the previous settings without saving.
