Crestron HD-MD4X4-4KZ-E Configuration Manual Download Page 35 | Manualshive

Page: 35 / 54

background image

30 • HD-MD8X8-4KZ-E, HD-MD8X4-4KZ-E, and HD-MD4X4-4KZ-E

Web Interface Configuration Guide — Doc. 8908C

Configure HDMI Output Setting

1. Optionally, edit the name of the HDMI output in the Name field.

2. Move the Disable Output slider to the right to disable the audio and video outputs. To

enable the audio and video outputs, move the slider to the left.

3. Move the Blank Video slider to the right to disable video. To enable video, move the slider

to the left.

4. Select the desired option from the HDCP Transmitter Mode drop-down menu to set the

HDCP Mode as follows:

a. Follow Input (Default): Authenticates each time the input sync changes its state.

The output will authenticate to the level reported at the Input.

b. Force Highest: Authenticates to the highest level HDCP supported by the

downstream device and always maintains sync.

c. Never Authenticate: The HDMI output will blank if the input is HDCP encrypted.

5. Click OK to save. Click Cancel to cancel the changes.

«
...
33
34
35
36
37
...
»

Summary of Contents for HD-MD4X4-4KZ-E























































Reviews:

No comments

Related manuals for HD-MD4X4-4KZ-E

DGS-1024D - Switch

Brand: D-Link Pages: 16

DGS-1016D - Switch

Brand: D-Link Pages: 44

DES-6000 Series

Brand: D-Link Pages: 3

DES-5024 - Switch

Brand: D-Link Pages: 2

DES-3828 - xStack Switch - Stackable

Brand: D-Link Pages: 3

Brand: D-Link Pages: 192

Brand: D-Link Pages: 9

Brand: D-Link Pages: 110

Brand: D-Link Pages: 10

Brand: D-Link Pages: 17

Brand: D-Link Pages: 4

Brand: D-Link Pages: 9

Brand: D-Link Pages: 4

DGS-105 - Switch

Brand: D-Link Pages: 4

Brand: D-Link Pages: 2

Brand: D-Link Pages: 2

852-112/000-001

Brand: WAGO Pages: 30

Brand: Conrad Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands