Software
Crestron
e-Control
®
Appendix D: Web Server Console Commands
PRO2 Help options for Ethernet
PRO2>help ether
ADDMaster
Add a “master” entry to IP table.
ADDPortmap
Add a port map to the NAT table.
CIPPORT
Set port number for CIP.
CTPPORT
Set port number for CTP (console).
DEFRouter
Set default router.
ESTatus
Display the status of the Ethernet.
ETHERNET
Enable/disable Ethernet.
ETHERTEST
Start Ethernet test.
HOSTname
Set the host name for DNS environment.
IPAddress
Set IP address.
IPMask
Set IP subnet mask.
IPTable
Display IP table.
KILLSOCKET Cancel an active TCP console socket.
NATENAble
Enable/disable Network Address Translator (NAT).
NATREMote
Enable/disable NAT Remote Config.
PING
Ping remote node.
REMMaster
Remove an entry from IP table.
REMPortmap
Remove a port map from the NAT table.
SHOWPORTMAP Display the current portmaps for the NAT.
WEBSERVer
Enable/disable Webserver.
WEBINIT
Initialize Webserver default file.
WEBPORT
Set port number for Webserver.
WHO
Generate a report of the Ethernet consoles.
X-Series/ Help options for Ethernet
*X-Series processors with a card must have 51263 ops to control the web
port interface.
Version 5.12.63-x 11/14/2001
__? Dir
_MAC_Adr Free
IP_Adr Del
IP_Mask Initialize
IP_MTU Xputfile
Def_router Type
Password Test1
Ver
Info
To change web port:
Restart [ESC]x’web[SPACE]”newport
#”[ENTER]
then
Web reboot
LimitWeb
60
•
Crestron e-Control®
Reference Guide – DOC. 6052
