Regulatory Compliance
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING:
Visible and invisible laser radiation when open. Avoid direct exposure to beam.
NOTE:
Plug the included dust cap into the optical transceiver when the fiber optic cable is unplugged.
Industry Canada (IC) Compliance Statement
As of the date of manufacture, the DM-RMC-SCALER-S and DM-RMC-SCALER-S2 have been tested and
found to comply with specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling.
The DM-RMC-SCALER-S and DM-RMC-SCALER-S2 are class 1 laser products. They comply with safety
regulations of IEC-60825-1, FDA 21 CFR 1040.11 and FDA 21 CFR 1040.10.
CAN ICES-3 (A)/NMB-3(A)
Regulatory Compliance
Federal Communications Commission
WARNING:
These are class A products. In a domestic environment these products may cause radio
interference in which case the user may be required to take adequate measures.
