background image

 

Supplemental Guide – DOC. 7591B

 

DMPS3-300-C-AEC/300-C/200-C: 3-Series DigitalMedia Presentation System 300

  

  13 

Restore Defaults Screen 

 

Front Panel Lock Control

 

The DMPS3-300/200-C’s front panel controls can be locked to prevent operational changes 

from the buttons on the front of the unit. While locked, the menu can be accessed by pressing 
the MENU button. Display the front panel lock controls: 

1.

 

Access the Control Setup menu as described on page 8.  

2.

 

Press the 

 or 

 buttons until Front Panel is displayed on the LCD, and press 

ENTER to display the Front Panel Lock controls. 

Front Panel Lock Controls Screen 

 

3.

 

Press the 

 

or 

 

buttons to toggle between On and Off. The current setting is indicated 

with an asterisk (*). 

4.

 

Press ENTER to save the desired setting, and return to the Control Setup menu. 

Default System Operation 

The following describes the operation of a default system. 

 

Turn On the System 
To turn on the system, press the POWER button. 

1.

 

Select an output by pressing any of the output buttons: 
1–4, PROG, AUX 1, or AUX 2 (PROG, AUX 1, and AUX 2 are audio only) 

2.

 

Select any of the source inputs by pressing an input button (1–7).

 

Turn Off the System 
To turn off the system, press

 

the

 

POWER button twice

.

 

Adjust the Volume Level 

The volume level of the DMPS3-200/300-C is adjusted with the VOLUME control  knob. The 

VOLUME control knob only controls the volume parameter that was  selected when the Volume 

Control mode was specified. 

 

To raise the volume, turn the VOLUME control clockwise. The volume  level is 
displayed on the LCD. 

 

To lower the volume, turn the VOLUME control counterclockwise. The  volume level 
is displayed on the LCD. 

Mute Audio 
The audio output of the DMPS3-200/300-C can be muted with the MUTE button. 

 

To mute the audio output, press the button labeled MUTE. 

To unmute the audio 

output, press the MUTE button again. 

Summary of Contents for DigitalMedia 3 Series



















Reviews: