Crestron DGE-100 Product Manual Download Page 68

Page: 68 / 90

64 • DGE-100 and DM-DGE-200-C

Product Manual — Doc. 7696D

HDMI Output Setting

Expand the HDMI Output Setting accordion to configure general settings for the HDMI output.

Disable Output: Turn on the toggle to turn off the HDMI output. When the output is
turned off, no video signal will be passed to the display connected to the HDMI output.

Blank Output: If Disable Output is turned off, turn on the toggle to use output blanking for
the HDMI output.

Resolution: Use the drop-down menu to select a compatible resolution for the
HDMI output signal.

Hot Plug Wake Up: Turn on the toggle to wake the display when a source is plugged into
the HDMI output while the DGE is running.

Connected Display

Expand the Connected Display accordion to view the status of the display connected to the
HDMI output.

Sink Connected: Reports whether the display device is connected to the DGE.

Manufacturer: The display device manufacturer.

Name: The display device name.

Serial Number: The display device serial number.

Summary of Contents for DGE-100



























































































Search results

Summary of Contents for DGE-100

Reviews:

Related manuals for DGE-100

Brands by name

Popular brands

Crestron DGE-100, Product Manual

Search results

Summary of Contents for DGE-100

Reviews:

Related manuals for DGE-100

Brands by name

Popular brands