Crestron
CWD1014
Two-Way RF Transceiver Module
Operations Guide - DOC. 6658
Two-Way RF Transceiver Module: CWD1014
•
7
Setup
Hardware Hookup
Refer to the hookup diagram below, which shows the connections made to the
module. Complete the connections in any order.
NOTE:
To prevent unit -to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
Hookup Connections for CWD1014
ANTENNA:
TRANSMITS
AND RECEIVES
RF SIGNALS
POWER-I/O:
PROVIDES
POWER AND
SYSTEM
INTERFACE
For more information on these connectors, refer to “Ports” on page 3.