Room Solution Box
Crestron
CNXRMC
8
•
Room Solution Box: CNXRMC
Operations Guide - DOC. 8162A
3. From the Viewport menu, select
Functions | Set Network ID
. The
software checks the baud rate and then opens the "Set Network ID"
window.
4. In the "Set Network ID" window, select the device requiring a Net ID
change from the
Current Network Devices
text window.
5. Select the new Net ID for the device from the
Choose the new network
ID for the selected device (Hex):
text box.
6. Click
Set ID
to initiate the change. This will display the "ID command
has been sent" window.
7. In the "Command Complete" window, click
OK
.
8. In
the
Current Network Devices
text window, verify the new Net ID
code.
9. In the "Set Network ID" window, click
Close
.
NOTE:
The new Net ID code may also be verified by selecting
Diagnostic | Report
Network Devices
in the Viewport (alternately, select
F4
).
10. Repeat this procedure for each additional network device requiring a
Net ID change.
Mounting
Two screw holes in each bottom flange accept #6 screws (not supplied). The
CNXRMC can be mounted in any orientation. Mounting hole spacing dimensions
are illustrated in “Physical Description” which begins on page 2.
Hardware Hookup
The CNXRMC is capable of tremendous flexibility in audio and video signal
distribution. Refer to “Audio/Video Distribution” on page 9 for detailed information.
Other than making the power connection (NET) last, complete the connections in
any order.
NOTE:
Refer to "Network Wiring" on page 6 when making connections to the port
labeled NET.
Video Input Compensation
After the system is connected, it may be necessary to adjust the video input
compensation pots on the CNXRMC to achieve the best picture on the monitor. This
requires a narrow slotted screwdriver and an audio/video calibration DVD (or laser
disc). Crestron recommends one of the following:
•
Avia Guide to Home Theater, from Ovation Software
(www.ovationsw.com)
•
Video Essentials, from DVD International (www.videoessentials.com).
To adjust the video input compensation:
1. Place the calibration disk in the system's DVD player.
Summary of Contents for CNXRMC
Page 1: ...Crestron CNXRMC Room Solution Box Operations Guide ...
Page 4: ......
