CRESTRON
CNRFT/CNIRT
One-Way Wireless Panels
R E M O T E C O N T R O L S Y S T E M S
3
DOC. 8107
LEADING SPECIFICATIONS:
Table 2 provides a summary of leading specifications for the wireless transmitters. Dimensions and
weight are approximations rounded to the nearest tenth unit.
Table 2. Leading Specifications
SPECIFICATION
DETAILS
Battery
9V DC
CRESNET II Workshop
Version 5.0 or later
CRESNET II Operating System
SR30160.OPS or later
CNRFT-32A & CNIRT-32A
Dimensions & Weight
Height:
6.2 in (15.7 cm)
Width:
6.4 in (16.3 cm)
Depth:
2.0 in (5.1 cm)
Weight:
0.7 lb (0.3 kg)
CNRFT-48A & CNIRT-48A
Dimensions & Weight
Height:
6.2 in (15.7 cm)
Width:
8.8 in (22.3 cm)
Depth:
2.0 in (5.1 cm)
Weight:
1.0 lb (0.5 kg)
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
