30 Function Hand-Held IR Transmitter Crestron
CNIRHT-MM
4
••
30 Function Hand-Held IR Transmitter: CNIRHT-MM Operations Guide - DOC. 8171
NOTE:
If the CNIRHT-MM is within line-of-sight of multiple
CEN/CN-TVAVs, the Transmitter ID must be unique only to the device
for which it is intended. Otherwise, the CNIRHT-MM will control
multiple CEN/CN-TVAVs simultaneously.
There are two methods to set the Transmitter ID code of the CNIRHT-
MM, by pressing keypad buttons that represent a Transmitter ID code or
via the CNIDC Identity Code Cable and a local personal computer (PC)
that contains SIMPL Windows or VisionTools
™
Pro-e (VT Pro-e).
Set or Display Transmitter ID via Keypad
Buttons
The Transmitter ID of the CNIRHT-MM may be accessed by using the
keypad buttons. This allows the Transmitter ID to be set or displayed
without using a CNIDC and PC.
Numeric Cross Reference Table
HEX
BINARY
MORSE
HEX
BINARY
MORSE
0
0000
- - - - -
8
1000
- - - . .
1
0001
. - - - -
9
1001
- - - - .
2
0010
. . - - -
A
1010
. -
3
0011
. . . - -
B
1011
- . . .
4
0100
. . . . -
C
1100
- . - .
5
0101
. . . . .
D
1101
- . .
6
0110
- . . . .
E
1110
.
7
0111
- - . . .
F
1111
. . - .
NOTE:
Morse code is displayed as short-flashes of the LED to represent dots and
longer-flashes to represent dashes.
1. Remove the CNIRHT-MM battery compartment cover.
2. At the battery compartment, disconnect the battery.
3. To establish a “0” key for displaying or setting the Transmitter
ID, press and hold any button for at least
five
seconds while re-
connecting the battery. Note that the LED of the CNIRHT-MM
will illuminate as the battery is connected, and will remain lit
until
five
seconds have expired as an indication that the button
has been held long enough to enter programming mode.
