Crestron
CNIRHT-MM
30 Function Hand-Held IR Transmitter
Operations Guide - DOC. 8171 30 Function Hand-Held IR Transmitter: CNIRHT-MM
••
3
2 The latest software version can be obtained from the What’s New page (SIMPL
Windows section) or Downloads page (SIMPLWIN Library) of Crestron’s
website (www.crestron.com). New users are required to register in order to obtain
access to the FTP site.
3 Filenames for update files have a UPZ extension and can be obtained from the
What’s New page (Control Systems Update Files section) or Downloads page
(OPSYS Library) of Crestron’s website. Update files are specifically designed for
certain control systems. If an update file is loaded into a control system other than
the device for which it was intended, it may lockup the control system which
would then have to be returned to Crestron. Update files with an “
S
” designator
are for the ST-CP, “
V
” designator for CEN/CN-TVAV, “
W
” for CNRACKX/-
DP, and “
X
” for CNMSX-AV/Pro control systems. Control systems are able to
recognize and reject incorrect update files. However, when updating control
systems, do not ignore any Crestron Viewport warning prompts or messages.
As of the date of manufacture, this unit has been tested and found to
comply with specifications for CE marking.
NOTE:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Transmitter ID Code
Every CNIRHT-MM communicating with the CEN/CN-TVAV requires
a unique IR transmitter ID code that matches an ID code specified in the
SIMPL Windows program in the CEN/CN-TVAV. Multiple CNIRHT-
MMs may be used with a single CEN/CN-TVAV but each unit needs a
unique Transmitter ID. This code is a two-digit hexadecimal number and
to maintain diversity within a Cresnet system, codes from 10 to FE are
used for the transmitters. The Transmitter ID of the CNIRHT-MM is
factory set to
10
.
NOTE:
Do not confuse Transmitter ID with network (NET) ID used by
all Cresnet system equipment and user interfaces.
