Crestron
CN-WP12F and CN-WP12N
Source and Numeric Keypads
Operations Guide - DOC. 5788A
Source and Numeric Keypads: CN-WP12F and CN-WP12N
••
3
Leading Specifications
The table below provides a summary of leading specifications for the CN-WP12F
and CN-WP12N. Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the CN-WP12F and CN-WP12N
S P E C I F I C A T I O N
D E T A I L S
Power Requirements
24 VDC, Load Factor of 2 Watts
1
Default Network IDs
4 C f o r t h e C N - W P 1 2 F a n d
4 8 f o r t h e C N - W P 1 2 N
S I M P L W i n d o w s
Version 1.30.01 or later
2
with library
update file smwlib45.exe and library
update document smwlib45.txt or later.
2
CNX Upgrade File
Version 5.04.11x.upz or later
3
C N H o m e . z i p
Version 1.0. or later
2
Dimensions & Weight
1
Height: 4.10 in (10.41 cm)
W idth: 1.74 in (4.42 cm)
Depth: 1.90 in (4.83 cm)
Weight: 5.50 oz (.16 kg)
1
The listed details apply to the CN-WP12F or the CN-WP12N as individual units
not as a pair or set.
2
The latest software versions can be obtained from the Downloads page
(SIMPLWIN and MACROS Libraries) of Crestron’s website
(
www.crestron.com)
. New users are required to register in order to obtain access
to the FTP site.
3
Filenames for CNX upgrade files have a UPZ extension and can be obtained
from the Downloads
As of the date of manufacture, these units have been tested and found to comply with
specifications for CE marking.
NOTE:
These devices comply with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference received, including interference
that may cause undesired operation.
Setup
Custom Switch Cap Installation
On the CN-WP12F, the top six buttons serve the function of source selector buttons.
The keypad has standard source selector switch caps installed and a kit of custom
switch caps is also supplied. The following procedure describes how to install the
custom switch caps (or re-arrange the standard switch caps) onto the keypad:
1.
If applicable, remove the designer or decorator wall-plate from the
CN-WP12F.
