Crestron CEN-SWPOE-24, Operation Manual, Page: 27 / 32

Crestron CEN-SWPOE-24 24-Port Managed PoE Switch
Operations Guide – DOC. 7036C 24-Port Managed PoE Switch: CEN-SWPOE-24
•
23
•
Flow Control : Select IEEE 802.3x function by Enable or Disable .
•
Link Status : Indicates the link status, Down is no connection.
PoE Setting The PoE Setting column displays the following information for each port on the
switch.
•
All PoE Ports : Select Enable (default setting) to allow the switch to
provide power to all PoE ports on the switch. Select Disable to turn off
power to all ports.
•
Mode : Select Auto (Default setting) to allow the switch to enable or disable
power to the port. Select Shutdown to remove power from the port. The
Status column displays the power status to the port; either On or Off .
Click Save to save the configuration.
Port Mirroring
The switch can mirror traffic from any source port to the MGMT port for real-time
analysis. It can then attach a logic analyzer or RMON probe to the target port and
study the traffic crossing the source port in an unobtrusive manner.
NOTE: Monitor port speed should match or exceed source port speed; otherwise,
traffic may be dropped from the monitor port.
All mirror sessions have to share the same destination port.
To configure port mirroring in a network, click the Port Mirroring selection. The
“Port Mirroring” screen opens.
Set the following attributes for port mirroring using the “Port Mirroring” screen.
•
Source Port : Select the port whose traffic will be monitored.
•
Method : Select which traffic to mirror to the target port: Disable , Rx , Tx or
Tx & Rx (input and output).
Specify the Source Port and the Method that the ports will be mirrored, then click
Save .
“Port Mirroring” Screen Example
To enable port mirroring press the recessed MGMT PORT MIRROR button. All
ports selected in the “Port Mirroring” screen are then mirrored to the MGMT port.
The MGMT PORT MIRROR LED illuminates. Click Save to save the
configuration.