High Powered RF Gateway
Crestron
CEN-HPRFGW
Acquiring the
Touchpanel
Touchpanels can communicate with a CEN-HPRFGW only if they have
been acquired by that CEN-HPRFGW. The
Acquire
mode can be
activated from Crestron Toolbox (recommended) or with the
ACQUIRE
button on the CEN-HPRFGW.
NOTE:
To access this in Toolbox, select
Functions | High Power RF
Gateway…
. Refer to the Toolbox Help file and search for “High Power
RF Gateway” for more details.
NOTE:
The
Acquire
mode can be activated approximately 15 seconds
after applying power to the CEN-HPRFGW.
NOTE:
In an environment with multiple gateways, only one gateway
should be in the
Acquire
mode at a time.
NOTE:
The CEN-HPRFGW must be placed in
Acquire
mode before a
touchpanel is placed in the
Acquire
mode.
To acquire a touchpanel via the
ACQUIRE
button on the
CEN-HPRFGW:
1. Press
ACQUIRE
on the CEN-HPRFGW to enter the
Acquire
mode. The accompanying LED will illuminate, indicating the unit
is ready to link to touchpanels.
NOTE:
The
Acquire
mode will automatically deactivate after one
hour. This default timeout period can be changed from Toolbox.
2. Place the closest touchpanel in the
Acquire
mode as described in
its manual. The device will be automatically acquired by the
gateway within two minutes after it enters
Acquire
mode.
3. Repeat step 2 for each touchpanel to be acquired.
4. Press
AQCUIRE
on the CEN-HPRFGW to exit the
Acquire
mode.
The LED will turn off.
24
•
High Powered Gateway: CEN-HPRFGW Operations & Installation Guide – DOC. 6587B
