The Crestron®
is a Cameo® in-wall universal phase
dimmer with field replaceable, engravable button caps. The
CLW-DIMUEX-P features auto load detection, which allows the dimmer
to switch between reverse and forward phase dimming depending on the
load connected. infiNET EX® communication technology brings reliability
to the CLW-DIMUEX-P without the need for physical control wiring.
In the Box
1
CLW-DIMUEX-P, Cameo® In-Wall Universal Phase Dimmer,
120 VAC
Additional Items
2
Plastic, Button, 2 Position
4
Plastic, Button, 4 Position
2
Screw, 6-32 x 3/4 in., Truss Head, Combo (2009211)
NOTE:
Refer to the CLW-DIMUEX-P
for a complete
list of color and texture variations.
Important Notes
WARNINGS:
l
To avoid fire, shock, or death, turn off power at circuit breaker or
fuse and test that power is off before wiring!
l
New installations should be checked for short circuits prior to
installing a CLW-DIMUEX-P dimmer. With power off, close the
circuit and restore power. If the lights do not work or a breaker trips,
check and correct the wiring or fixture (if necessary). Install the
dimmer only when the short is no longer present. The warranty is
void if the dimmer is installed and operated with a shorted load.
CAUTION:
TO REDUCE THE RISK OF OVERHEATING AND POSSIBLE
DAMAGE TO OTHER EQUIPMENT, DO NOT INSTALL TO CONTROL A
RECEPTACLE, A MOTOR-OPERATED APPLIANCE, A FLUORESCENT
LIGHTING FIXTURE, OR A TRANSFORMER-SUPPLIED APPLIANCE.
ATTENTION:
GRADATEURS COMMANDANT UN BALLAST-AFIN DE
RÉDUIRE LE RISQUE DE SURCHAUFFE ET LA POSSIBILITÉ
D’ENDOMMAGEMENT À D’AUTRES MATÉRIELS, NE PAS INSTALLER
POUR COMMANDER UNE PRISE, UN APPAREIL D’ÉCLAIRAGE
FLUORESCENT, UN APPAREIL OPÉRÉ DE MOTEUR OU UN APPAREIL
ALIMENTÉ PAR UN TRANSFORMATEUR.
NOTES:
l
Codes: This product should be installed and used in accordance with
appropriate electrical codes and regulations.
l
Installation: This product should be installed by a qualified electrician.
l
Wiring: Use copper wire only. For supply connections, use wires rated
for at least 75° C (167° F).
l
Lamp Type: For use with permanently installed LED, incandescent,
electronic low voltage, or magnetic low voltage transformer lamp
fixtures only.
l
Temperature: For use where temperatures are between 32° to 95° F
(0° to 35° C).
l
Electrical Boxes: Devices mount in standard electrical boxes. For easy
installation, use 3 1/2 in. (89 mm) deep electrical boxes. Several
devices can be installed in one electrical box (multigang). This requires
derating of the dimming device. For a smooth appearance, one-piece
multigang faceplates (not supplied) can be installed.
1
CLW-DIMUEX-P
Quick Start
Cameo® In-Wall Universal Phase Dimmer, 120 VAC