TV & FM Radio Tuner
Crestron
C2N-TTVFM
36
•
TV & FM Radio Tuner: C2N-TTVFM
Operations Guide - DOC. 6266A
3. As shown after this step, select the Net ID of the C2N-TTVFM and
then click
OK
. The “Open” window appears (refer to the subsequent
graphic).
“Select Network ID” Window
NOTE:
When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed.
“Open” Window
4. Browse to the desired .upg file and click
Open
to begin the transfer.
Firmware Upgrade – AMWX Tuner
The procedures for upgrading the firmware for the AMWX Tuner are almost identical
to those for the TV/FM Tuner. The difference is that the AMWX Tuner is not a
standalone Cresnet device, but is a sub-slot device to the TV/FM Tuner. To upgrade
the firmware, complete the following steps.
1. Make sure that “Communication Settings” that begins on page 32 has
been performed.
2. As shown after this step, select
File Transfer | Update Sub-Slot
Device Firmware
from the Viewport menu.
Summary of Contents for C2N-TTVFM
Page 1: ...Crestron C2N TTVFM TV FM Radio Tuner Operations Guide...
Page 4: ......
