Crestron
C2N-NPA8
Network Poll Accelerator
Typical Connection Diagram when Uploading
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport or start SIMPL
Windows and from the menu bar, select
Tools | Viewport
.
2. Refer to the following figure after this step. From the Viewport menu,
select
Setup | Communications
settings
(alternatively, press
Alt+D
)
to open the “Port Settings” window.
Setup | Communications Settings Command
3. Select
RS-232
as the connection type. Verify that an available COM
port (COM 1 is shown after this step) is selected, and that all
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the
OK
button to save the settings and close the window.
Operations Guide – DOC. 6087A
Network Poll Accelerator: C2N-NPA8
•
23
