IR Gateway
Crestron
C2N-IRGW-1G & C2N-IRGW-F
Setup
Network Wiring
When wiring the network, consider the following:
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION:
Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system
(
http://www.crestron.com/calculators
).
•
For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to maintain
signal quality.
For more details, refer to “Check Network Wiring” on page 19.
Identity Code
The Net ID of the C2N-IRGW-1G and C2N-IRGW-F has been factory set to
2D
.
The Net IDs of multiple C2N-IRGW-1G and C2N-IRGW-F devices in the same
system must be unique. Net IDs are changed from a personal computer (PC) via the
Crestron Toolbox™. When setting the Net ID, consider the following:
•
The Net ID of each unit must match an ID code specified in the SIMPL
Windows program.
•
Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation
When choosing a location for the C2N-IRGW-1G and C2N-IRGW-F, consider how
reception varies with the angle of incidence of the signal from the transmitter (refer
to illustrations on the next page).
6
•
IR Gateway: C2N-IRGW-1G & C2N-IRGW-F
Operations & Installation Guide – DOC. 6468A
