Crestron C2N-DEMO, Reference Manual

Page: 16 / 24

Demonstration Case Crestron C2N-DEMO Lighting Case
Button 5 (EVEN)
[BM = Single Press / Learnable, FB = On when ALL lights are at PRESET
LEVEL, Loads = Bath Vanity, Bath Ceiling Lights, Bath Downlights]
When this button is pressed, it turns on all loads to a preset level over a defined
period.
Button 6 (CLOSETS)
[BM = Dim, FB = Toggle, Loads = Bath Ceiling Lights]
On press 1, this button turns the load to a preset level and then off again on press 2.
Button 7 (RELAX)
[BM = Single Press / Learnable, FB = On when ALL lights are at PRESET
LEVEL, Loads = Bath Vanity, Bath Ceiling Lights, Bath Downlights]
When this button is pressed, it turns on all loads to a preset level over a defined
period.
Button 8 (FAN)
[BM = Timeout, FB = Blink until Timeout, Loads = Bath Exhaust Fan]
When this button is pressed, the load turns on until the timeout occurs at which point
the load shuts off. If the button is pressed before the timeout occurs, the timer resets.
Button 9 (MUSIC)
This button toggles the audio system for the master bathroom on and off. The
feedback LED illuminates when the audio system is active.
Button 10 (VOL +)
This button increases the volume level of the virtual audio system. The feedback
LED illuminates only while the button is pressed.
Button 11 (SOURCE)
This button cycles through the various virtual audio sources. The feedback LED
illuminates only while the button is pressed. Audio WAV files are triggered with the
selection of each new source. This demonstrates how even a simple interface such a
keypad can give detailed feedback information.
Button 12 (VOL -)
This button decreases the volume level of the virtual audio system. The feedback
LED illuminates only while the button is pressed.
12
•
Crestron Demonstration Case: C2N-DEMO Lighting Case Reference Guide – DOC. 6282