Crestron C2N-DEMO, Reference Manual

Page: 14 / 24

Demonstration Case Crestron C2N-DEMO Lighting Case
This interface was programmed as the primary control point for the dining room.
The entire virtual house can be monitored from the web page project associated with
this system.
Button 1 (DINNER PARTY)
[BM = Single Press / Learnable, FB = On when ALL lights are at PRESET
LEVEL, Loads = Dining Chandelier, Dining Downlights, Dining Sconce]
When this button is pressed, it turns on all loads to a preset level over a defined
period.
Button 2 (CHAND)
[BM = Dim, FB = Toggle, Loads = Chandelier]
On press 1, this button turns the load to a preset level and then off again on press 2.
Button 3 (SCONCE)
[BM = Dim, FB = Toggle, Loads = Dining Sconce]
On press 1, this button turns the load to a preset level and then off again on press 2.
Button 4 (DOWN LIGHTS)
[BM = Dim, FB = Toggle, Loads = Dining Downlights]
On press 1, this button turns the load to a preset level and then off again on press 2.
Button 5 (MUSIC)
This button toggles the audio system for the dining room on and off. The feedback
LED illuminates when the audio system is active.
Button 6 (
K
VOL)
This button increases the volume level of the virtual audio system. The feedback
LED illuminates only while the button is pressed.
Button 7 (SOURCE)
This button cycles through the various virtual audio sources. The feedback LED
illuminates only while the button is pressed. Audio WAV files are triggered with the
selection of each new source. This demonstrates how even a simple interface such a
keypad can give detailed feedback information.
Button 8 (VOL
J
)
This button decreases the volume level of the virtual audio system. The feedback
LED illuminates only while the button is pressed.
10
•
Crestron Demonstration Case: C2N-DEMO Lighting Case Reference Guide – DOC. 6282