Crestron
C2COM-2/3
2-Series RS-232/422/485 Expansion Cards
Programming Software
Have a comment about
Crestron software?
Direct software related
suggestions and/or
complaints to Crestron via
email
(
Do not forward any queries
to this address. Instead refer
to “Further Inquiries” on
page 12 for assistance.
Setup is easy thanks to Crestron’s Windows
-based programming software.
Crestron Application Builder™ (AppBuilder) creates a complete project, with no
special programming required. Crestron AppBuilder completes all necessary
programming for a base system. Once Crestron AppBuilder creates the project, the
system interfaces and program logic can be customized. It can easily be modified
with Crestron development tools (i.e., SIMPL Windows).
The program output of Crestron AppBuilder is a SIMPL Windows program with
much of the functionality encapsulated in macros. Therefore, extending the
capabilities of the system is very easy. Crestron AppBuilder and SIMPL Windows
are intended for users with different levels of programming knowledge. Crestron
AppBuilder is easier to use for the beginning programmer, and much faster for all
programmers. However, it does not allow the degree of control and flexibility that
SIMPL Windows does. Of course, one can initiate programming using the easiest
method (Crestron AppBuilder) and use advanced techniques that are available from
SIMPL Windows to customize the job.
The following are recommended software version requirements for the PC:
•
SIMPL Windows version 2.04.04 or later with library update file 209
(C2COM-3 only requires version 2.01.06 or later). Requires SIMPL+ Cross
Compiler version 1.1.
•
Crestron Database 15.9.1 or later.
•
Application Builder 1.1.9 (1.1.9 for C2COM-2) or later. Requires SIMPL
Windows.
Programming with the Crestron AppBuilder
The easiest method of
programming,
but does not offer as much
flexibility
as SIMPL Windows.
The Crestron AppBuilder offers automatic programming for such residential and
commercial applications as audio distribution, home theater, video conferencing,
and lighting. The interface of this tool guides you through a few basic steps for
designating rooms and specifying the control system, touchpanels, devices, and
functionality. The Crestron AppBuilder then programs the system, including all
touchpanel projects and control system logic.
The Crestron AppBuilder is fully integrated with Crestron's suite of software
development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User
IR Database, and User Modules Directory. The Crestron AppBuilder accesses these
tools behind the scenes, enabling you to easily create robust systems.
Programming with SIMPL Windows
NOTE:
The following assumes that the reader has knowledge of SIMPL Windows.
If not, refer to the extensive help information provided with the software.
NOTE
: The following are acceptable file extensions for programs that include a
C2COM-2/3, developed for specific control system types:
.smw
projectname
.smw (source file)
.spz
projectname
.spz (compiled file for 2-series)
. .usp
projectname
.usp (source code module for SIMPL+)
NOTE
: In the following, the PRO2 control system is used.
Operations & Installation Guide - Doc. 8192
2-Series RS-232/422/485 Expansion Cards: C2COM-2/3
•
7
Summary of Contents for C2COM-2
Page 4: ......
