22 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3
Configuration Guide — 8341B
Configure Trunk Attributes
Define attributes for the trunk used for PSTN calls. This example modified the attributes
of Trunk Number 5, as shown below.
To configure trunk attributes (for this example):
1. Click Trunks > Trunk Attributes.
2. Select an unused Trunk Service Number. This example uses 10.
Mitel: Configure Trunk Attributes
3. Click Change.
4. Enter a descriptive name such as Crestron for the Trunk Label.
5. Enter 10 (configured earlier) for the Class of Service.
6. Enter 0 for Dial In Trunks Incoming Digit Modification - Absorb.
NOTE:
Mitel absorbs none of the incoming digits on an incoming PSTN call to the
desired PBX extension based on the configured translation.
7. Leave Dial In Trunks Incoming Digit Modification - Insert blank.
