manualshive.com logo in svg

Crestron AV2, Operation Manual

Share
Download
Crestron AV2 Operation Manual Download Page 32

2-Series Integrated Dual Bus Control System 

 

Crestron 

AV2 & PRO2

 

The Crestron AppBuilder is fully integrated with Crestron's suite of software 
development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User 
IR Database, and User Modules Directory. The Crestron AppBuilder accesses these 
tools behind the scenes, enabling you to easily create robust systems.  

Programming with SIMPL Windows 

SIMPL Windows is Crestron’s graphical, Windows-based development tool for 
programming control systems. The SIMPL Windows interface provides two 
workspaces: the Configuration Manager, for configuring the control system, 
touchpanels, and controlled network devices; and Program Manager, for designing 
the logic and functionality of the control system. 

In addition, you can use Crestron’s powerful Viewport utility to accomplish multiple 
system tasks, such as uploading the program to the control system and performing 
diagnostic functions. Together with the Crestron Database, these tools provide you 
with the essential components you need to program the AV2/PRO2. Crestron 
software is available on CD-ROM, or can be downloaded from the Crestron website 
(

www.crestron.com

)—registration is required for downloading. 

NOTE:

  The information in this section assumes that the reader has knowledge of 

SIMPL Windows. If not, refer to the extensive help information provided with the 
software.  

AV2/PRO2 Device Library Symbols 

In Configuration Manager, drag the AV2, AV2 with Card Cage, or PRO2 from the 
Control Systems folder of the 

Device Library

 to 

System Views

. The AV2 with Card 

Cage and PRO2 symbols are identical; the AV2 does not provide the Y-Bus 
expansion slots. Refer to the following illustration. 

System Views of the AV2 (without optional card cage) and PRO2 

 

 

Slot 1, 2, 3: Y-Bus Expansion Slots (Optional on AV2) 

The 40Mb/s Y-BUS supports existing CNX control cards and permits adding 
multiple IR, serial communications, and/or relay ports to the control system. 

Slot 4: C2I-COM6 

The AV2 and PRO2 provide six serial COM ports (A through F) that enable RS-232, 
RS-422, and RS-485 communication. 

28  

•

  Integrated Dual Bus Control System: AV2 & PRO2 

Operations Guide - DOC. 5957A 

Summary of Contents for AV2





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands