Crestron AirMedia Series 3 Product Manual Download Page 29

Page: 29 / 112

Product Manual — Doc. 9020B

AirMedia® Series 3 Receivers • 25

Host Name: Enter the receiver host name (22 characters or less).

Domain: Enter the fully qualified domain name on the network (optional). This field is
prefilled when the DHCP toggle is turned on.

NOTE:

A host name and domain name can act as an alternative to IP addressing for

connecting client computers to the device.

SSH: Turn on the toggle to enable Secure Shell protocol (SSH).

Primary Static DNS: Enter the primary DNS address.

Secondary Static DNS: Enter the secondary DNS address.

Network Adapter 1 - Main

DHCP: Turn on the toggle to use DHCP for the Ethernet connection. When enabled,
the IP address, subnet mask, and default gateway settings are automatically filled.
If the toggle is off, these settings must be entered manually.

IP Address: Enter the receiver IP address on the network. This field is prefilled when
the DHCP toggle is on.

Subnet Mask: Enter the device subnet mask address on the network. This field is
prefilled when the DHCP toggle is on.

Default Gateway: Enter the gateway router address on the network. This field is
prefilled when the DHCP toggle is on.

Summary of Contents for AirMedia Series 3

















































































































Search results

Summary of Contents for AirMedia Series 3

Reviews:

Related manuals for AirMedia Series 3

Brands by name

Popular brands

Crestron AirMedia Series 3, Product Manual

Search results

Summary of Contents for AirMedia Series 3

Reviews:

Related manuals for AirMedia Series 3

Brands by name

Popular brands