Crestron AirMedia Series 3 Product Manual Download Page 11

Page: 11 / 112

Product Manual — Doc. 9020B

AirMedia® Series 3 Receivers • 7

Action Menu

The web configuration interface provides an Action drop-down menu. The Action menu may be
accessed at any time.

Action Menu

The Action menu provides the following selections.

Save Changes

Once any changes have been made to the receiver configuration, the Action button becomes a
Save Changes button. Select Save Changes to save changes to the configuration settings.

If a reboot is required after changes have been saved, select Yes to reboot the device or No to
cancel the reboot.

Revert

Select Revert to revert the receiver to the last saved configuration settings.

Update Firmware

To upgrade the device firmware manually with a downloaded PUF (package update file), select
Update Firmware. The Firmware Upgrade dialog box opens.

NOTE:

Visit

crestron.com/firmware

to download the latest firmware PUF.

Summary of Contents for AirMedia Series 3

















































































































Search results

Summary of Contents for AirMedia Series 3

Reviews:

Related manuals for AirMedia Series 3

Brands by name

Popular brands

Crestron AirMedia Series 3, Product Manual

Search results

Summary of Contents for AirMedia Series 3

Reviews:

Related manuals for AirMedia Series 3

Brands by name

Popular brands