Crestron 3 Series Reference Manual Download Page 55

Page: 55 / 68

Reference Guide – DOC. 7150B

3-Series Control Systems

•

DeviceHostname
This parameter is only valid for an Ethernet device and can have multiple

meanings:

•

If the

"deviceModel"

specifies an Ethernet device, then the

"deviceHostname"

identifies the device to be updated. If the

"deviceHostname"

is the wildcard character "*", then it identifies all the

Ethernet devices of the type specified by

"deviceModel"

•

For any combination of

"deviceModel"

and

"deviceId"

, it needs to be

established whether the device to be updated is on the controller or on a

peripheral connected to the controller:

If the

"deviceHostname"

is defined, then the device to be updated is

connected to an Ethernet-connected parent device.

If the

"deviceHostname"

is not defined, then the device to be

updated is connected to the controller (Cresnet device/internal

gateway).

If the

"deviceHostname"

is "*", then all devices will be updated as

defined by the

"deviceModel"

parameter in one of the following

three ways:



All gateways will be updated



All specific devices connected to internal/external gateways will be

updated



All Cresnet devices of a specified type connected to a CEN-CN or

all EX devices connected to an external Ethernet gateway will be

updated.

IndirectCresnetId
This parameter is only valid when the

"deviceModel"

specifies an EX device:

•

If the

"deviceModel"

specifies an EX device, then it indicates the Cresnet

ID of the gateway.

•

"indirectCresnetId"

is "*", then it indicates the specific device

connected to any Cresnet gateway.

•

If the value of this parameter is not defined, then the device to be

updated is connected to the controller (Ethernet device/internal

gateway).

Summary of Contents for 3 Series





































































Search results

Summary of Contents for 3 Series

Reviews:

Brands by name

Popular brands

Crestron 3 Series, Reference Manual

Search results

Summary of Contents for 3 Series

Reviews:

Brands by name

Popular brands