Aak Safety
5 Marking
5.1 Marking of the bag
The seal of the bag has individual
marking and is traceable.
5.2 Marking of the rope and the descender device
The rope is marked at the upper knot with the manufacturer of the $martline, a 3 letter code for the assembler of the rope onto
the descender device, and month/year of the assembling.
The rope is marked at the lower knot with the number of the very first seal – ensuring traceability in case the seal is lost.
The descender device is marked with notified body, the relevant European standard and serial number indicating year of produc-
tion and a batch number.
6 Compatibility
Every component used together with the $martline should be CE-marked.
6.1 Harnesses
The $martline may be used in combination with a sit-harness to EN813, a full body harness to EN361 or a rescue harness ac-
cording to EN1497. It shall be attached to the harness as recommended by the manufacturer, and in case of self-rescue it must
be connected to a front attachment element.
6.2 anchorages
The anchor sling may be used on constructions without permanently installed anchors. The anchor sling should preferably be
placed around bearing parts of the construction, and must be able to support a minimum load of 10 kN. The karabiner may also
connect directly to a part of the structure as long as this part supports a load of 10 kN and does not cause unintended strain on
the karabiner.
If special designed anchors are used, these shall conform to EN795.
7 Log and documentation
This manual should always accompany the equipment. In the form on the last page, all specific information about the equipment
must be filled in. The user must fill in the dates for when the equipment has been used for the first time, and all periodic checks
or repairs the equipment has been through. The owner of the equipment is responsible for keeping this log updated.
8 Compliance
As a manufacturer, Cresto AB declares that their $martline is in accordance to the direc
tive 89/686/EEC and that it is tested and approved in accordance with the European standard
EN 341 class D.
Cresto AB is very interested in
feedback from our customers re-
garding this product. Especially
from people having used this pro-
duct during an emergency. Please
send your comments to the adress
below, att: Product Manager
Cresto AB, Lägatan 3
302 63 Halmstad
Sweden.
www.cresto.se
EC Type-examination by:
SGS United Kingdom Ltd.
Unit 202B
Worle Parkway
Weston-super-Mare
BS22 6WA
United Kingdom (Notified body No: 0120).
Notified body for the production:
SP Sveriges Tekniska Forskningsinstitut
Box 857
S-50115 Borås
SWEDEN (Notified body No: 0402).
Instructions for use
$martline
|
Revision number: 12, 2012-12-12
CE-mark and
notified body
Date of assembly
MMYY
Producer
Version
number
Restrictions
on use
Read user
instruction
Standard used
Length of line
Maximum load
