4-4
Front Panel Functions
The image below details the functions of the front panel. These functions are the same for the remote control-
ler.
1
2
3
4
5
6
7
8
14
13
12
11
10
9
1) Power button - Turns the unit on and off.
2) Enter and cursor movement control - Moves the on screen cursor in the direction of the arrow.
Pressing the center button selects desired function.
3) Menu button - When pressed this button will bring up the on screen pop up menu.
4) PTZ button - Changes the selected camera into PTZ mode.
5) Search button - When pressed brings up the search menu.
6) Seq. button - When pressed this will put the on screen cameras into sequence mode. Pressing it
again will take the on screen cameras out of sequence mode.
7) Mode button - When pressed this will change the on screen camera display. Please see screen
display section for screen descriptions.
8) Jog Shuttle - When in playback mode turning the jog shuttle a small amount to the right will
increase the playback speed. Continued turning to the right will speed up playback. The different
playback speeds are 1,2,4,16,32,64,128,256 times normal speed. Turning the jog shuttle a small
amount to the left will increase the backward playback speed. Continued turning to the left will
speed up backward playback. The different backward playback speeds are -2,-4,-16,-32,-64,-128,
-256 times normal speed.
9) ESC. button - When pressed will back out of a command.
10) Play Backward/Zoom in button - When in playback mode this button will play recorded video
backward. When in PTZ mode it is used to zoom the camera in.
11) Play Forward/Zoom Out button - When in playback mode this button will play recorded video
forward. When in PTZ mode it is used to zoom the camera out.
12) Pause button - When in playback mode this button will pause the playback of video.
13) Emergency Record button - When pressed this button will record all cameras in continuous
mode until it is pressed again. This will take precedence over any setting you have set up in the
system.
14) USB ports - USB ports can be used to connect external USB devices, such as a mouse or external
HDD to the DVR.
