- 4 -
The main elements of the PTS are listed in Table 1.
Table 1: FMC masterFIP PTS elements
Item
Comments
Computer
A computer based on motherboard with 4 line PCIe slots is required
Monitor
Keyboard, Mouse
Barcode reader
With USB connection to the computer
ESD wrist strap
With banana type connection to the computer chassis
PCIe extender cable
Two spacers and four screws to fix the PCIe extender board to the
computer case
SPEC board
Four spacers and height screws are used to fix the board to the
computer case
FMC masterFIP
Board under test
1x LEMO cable
Any length, min 2 ns recommended
1x LEMO – Dsub9 custom cable
Schematic shown in Figure 9, picture of real component in Figure 6
1x LEMO – miniDsub9 custom
cable
Schematic shown in Figure 9, picture of real component in Figure 6
nanoFIPDiag
nanoFIPdiag version must match FMC masterFIP under test speed
version.
http://www.ohwr.org/projects/nanofipdiag/wiki
USB relay box 1
FMC Fine Delay version.
USB cable provided
http://www.ohwr.org/projects/usb-relay-box1/wiki
Documentation
This user guide plus the one-page testing procedure
In terms of software, the computer is equipped with the following:
Table 2: PTS software requirements
Ubuntu Linux 14.04.00 LTS
Python 2.7
The user login is:
Table 3: Computer login
Username
user
Password
baraka
Note that after the software installation the computer should be disconnected from the network and no
updates should be allowed.
