CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
12
Handheld Wireless Programmable Touch Screen User's Manual
screen has been connected to the PGMIII
controller , and when this icon appears, the
prompt information will be hidden automatically in
two seconds;
Grey WiFi icon represents the touch screen
has been disconnected with PGMIII controller ;
IP information displays controller
IP address
and port number touch to whom screen asks for
connection;
"TPID": the ID of touch screen, as shown in the
above figure, the touch screen ID is10;
"PGMIII": represents the current controller models,
namely, PGMII and PGMIII.
70%: the touch screen is charging;
70%: the remaining electricity quantity and
percentage of touch screen;
"12:12": the current time.
②
Double-click any blank place on the screen (i.e.
no control) can display the message and hidden
functions.
③
When trigger JNO controls (buttons, bars), the
control state only change after receiving feedback
data from controller , or else the control state
remains.
2.When the touch screen is in the RF one-way
control mode (the PGMII, PGMIII controller does
not feedback information)
1
Starting the touch screen will pop-up prompt
information, inform the user that the touch screen
in a certain controlled manner. The prompt
information will automatically hide in 3 seconds,
as shown in figure 2-30:
Figure 2-30
Suggesting being in RF one-way control;
"TPID": the ID of touch screen, as showed in
above figure, the touch screen ID is 10;
"PGMIII": represents the current connected
controller type.
2
Double-click any blank place on the screen
(i.e. no control) will pop-up prompt information.
3.When the touch screen is set on the charging
base or connected to external power, it will pop up
a message, as shown in figure 2-31:
Figure 2-31
Please refer to “The user’s manual of Touch
Panel G Series” for other operations about
programmable
touch
screen
software
ThinkDraw.
