Creator
OBDII/EOBD scanner
23
5. OBD II Diagnostics
Select [DIAGNOSE] in Main Menu and press
[
].
The screen will display a sequence of messages
displaying the OBDII protocols will be observed
on display until the vehicle protocol is
detected.
◆if the scan tool fails to communication with
the vehicle’s ECU, a “ERROR” message shows
up on the display
Communication error!
-- Please make sure:
1. System equipped?
2. Cable connect ok?
-- Maybe you can turn off the key, then turn
on the key, and try again.
When the scanner communicate with the vehicle, the
screen will display the [Diagnostic Menu], as shown
below:
