ZiiSound D5x
CENTER Speaker
ZiiSound D5x
LEFT Speaker
ZiiSound D5x
RIGHT Speaker
A
B
A
B
0
4.1
Returning to standby and Powering On the D5x with active Links
Section 4 : Other speaker features
Returning to Standby
The Linked speakers can be brought to Standby in unison by pressing the Power ON/Standby
Button located at the rear of the RIGHT Master speaker.
Powering ON with active links
The Linked speaker can be Powered ON with active links to each other by pressing the Power
ON/Standby Button of the RIGHT Master speaker with the mains powered ON on all the other
speakers.*
*Powering ON with active links can only be done on the Master speaker as the slave speakers are listening to instructions
from the Master speaker, even in standby.
** For the ZiiSound D5x, Powered ON is indicated with the Volume LED Status Indicator lit up.
Disabling the LINK for individual D5x operation
You can disable the LINK connection to all the linked speakers by simply pressing the LINK
Touchpad / Button once on the RIGHT Master speaker. This will bring down the LINK and restore
the functions of the Volume control, AUX-IN, CONNECT Touchpad and Volume Touchpad / Button,
which locked in link mode, back to each individual D5x. Once activated, there is no LED indication
on the LINK LED status indicator for all D5x.
4.2
Disabling / Restoring the link system for individual / Linked
speaker
usage
(only for 2.0 and above setup)
Restoring LINK for linked speaker usage
To restore the LINK from the sets of individual speakers, you can Press the LINK Touchpad / But-
ton once on either any of the speakers with all other D5x(s) and subwoofer Powered ON**. This
will result in restoring the state of the speakers shown by it LED indication in either Multi-channel
or Party mode.
4.3
Reset to factory setting
Follow these steps to return to factory settings to clear
Bluetooth paired device memory and Link
configurations in the ZiiSound D5x.
Note
: The above can also be applied to LEFT and CENTER speaker to clear
Bluetooth paired device memory and Link configurations
should the need arise.
Action
LED status
Status
Transmitter
Disconnect the Transmitter
Press and hold the Pairing Button while
inserting the Transmitter to iPhone/iPod and
hold for 8 seconds
Transmitter LED
fast blinks
Transmitter has been reset
and is in pairing mode
ZiiSound D5x
Return the speaker to Standby by pressing the
Power ON/ Standby button.
Press and hold Power button for 10 seconds.
CONNECT LED and LINK
LED blinks twice and
turns off. This indicates a
successful Factory reset.
Powered On. Ready for next
user action.
Summary of Contents for ZiiSound D5x
Page 1: ...2 27 49 71 93 115 137 159...