background image

Safety Information

Refer to the following information to use your product safely, and to reduce the chance of electric shock, 
short-circuiting, damage, fire, hearing impairment or other hazards. 

Improper handling may void the 

warranty for your product. For more information, read the warranty available with your product. 

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install the product in accordance with the instructions.

Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.

Do not expose your product to temperatures outside the range of 0°C to 40°C (32°F to 104°F).

Do not pierce, crush or set fire to your product.

Keep your product away from strong magnetic objects.

Do not subject your product to excessive force or impact.

Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. 
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into 
your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to 
avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Do not dismantle or attempt to repair your product.

Refer all servicing to authorized and qualified service personnel.

 Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been dropped.

WARNING:

 To reduce the risk of fire or electric shock, do not expose your product to water or 

moisture. If your product is moisture-resistant, take care not to immerse your product in water or 
expose it to rain.

Earphones

When a conductive apparatus, such as earphones, is used in close proximity with a CRT television 
or CRT monitor, the latter may emit an electrostatic discharge. The electrostatic discharge can be 
felt as a static shock. While this static shock is usually harmless, it is good practice to avoid close 
contact with CRT devices when using earphones.

Do not listen to audio on your earbuds or headphones at high volume for prolonged periods of time 
as hearing loss may result. For users in the United States, go to 

www.hei.org

 for more 

information.

Do not listen to your audio device at high volume when driving, cycling or crossing the road, 
especially in heavy traffic, or in any other traffic condition where such use will hinder safe travel on 
the roads. We recommend that consumers be extremely cautious when using this device on the 
road.

Avoid Hearing Damage

Permanent hearing loss may occur if the Sound Blaster Tactic3D Omega Headset is used at high volume. 
Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound 
normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, 
stop listening and hav your hearing checked. The louder the volume, the less time is required before your 
hearing could be affected. Hearing experts suggest that to protect your hearing.

1. Limit the amount of time you use the Sound Blaster Tactic3D Omega Headset at high volume.

2. Avoid turning up the volume to block out noisy surroundings.

3. Turn the volume down if you can’t hear people speaking near you.

Embedded Battery

Do not attempt to remove the embedded battery.
The product must be disposed of according to local environmental regulations. To replace the 
battery, return your product to your regional support office. For product service information, go to 

www.creative.com

.

Do  not expose to excessive heat such as sunshine, fire or the like

CAUTION: Risk of explosion if battery is replaced by incorrect types.

Summary of Contents for SOUND BLASTER TACTIC 3D OMEGA WIRELESS -


































Reviews: