Setting Up NOMAD II Player 9
Once your NOMAD II Player is properly connected, your computer
displays the Add New Hardware Wizard dialog.
To install the NOMAD II driver:
1. On the Add New Hardware Wizard dialog, click the Next button.
2. Select “Search for the best driver for your device.
(Recommended)” and click the Next button.
3. Clear the “Floppy disk drives” check box and select “CD-ROM
drive.”
4. Click the Next button twice and, on the screen similar to the one
to the right, click the Finish button.
5. Click Start on the Windows Taskbar, select Settings, and click on
Control Panel.
6. On the Control Panel, double-click the System icon.
7. On the System Properties dialog, click the Device Manager tab.
8. On the Device Manager tab page, click the plus sign (+)
preceding Universal Serial Bus controllers. Creative NOMAD II
must be included in the list.
If the NOMAD II driver is not included, disconnect the Player
from the computer. Reconnect the Player to the computer—you
may want to use a different USB port, if available—and re-
install.
Before you re-install the
driver,
manually
remove
the old driver if it is listed.