Setting Up NOMAD II Player 6
#$
!
Connect the headphones and remote control to the NOMAD II Player as shown below.
The headphones are designed to be worn as shown in the figure to the right.
Your NOMAD II Player is now ready for you to listen to the sample on the flash memory card, listen to an FM
radio station, or make a voice recording.
Install the programs on the installation CD before running any of the applications or listening to the music on the
sample CD.
To install the software for Windows:
1. Insert the Creative NOMAD II installation CD into the CD-ROM drive. If the Setup program runs
automatically, go to step 4 below.
2. Click the Start button on the Windows Taskbar and click Run.
3. On the Run dialog, type
D:\CTRUN\CTRUN.EXE
(
D:\
is your CD-ROM drive) and click the OK button.
4. On the Creative NOMAD II setup screen, the applications to be installed are selected. Click the Right Arrow
button to begin the installation.
5. When the Creative Product Registration dialog appears, click the Next button to begin your on-line
registration.
If you want to register your NOMAD II later, press the Cancel button.