background image

7

A

C

D

B

Speaker Placement

The front left and front right satellites
should be placed to the sides of the
monitor. When placing satellites on
the desktop, install the desktop
stands. If you wish to save desktop
space, use the hook and loop fasteners
to attach the satellites to the sides of
the computer monitor (see page 15).

If your are lucky enough to have

side walls close to your listening
position, excellent placement for the
left rear and right rear satellites is
alongside or behind your listening
position, slightly above ear level (use
the hook and loop fasteners, see
diagram A). Do not be concerned if
this is not practical, since any rear
satellite placement to the left and right
side of the listening position will

attach the rear satellites under a desktop
or at the sides of a desk using the hook
and loop fasteners (D).

The subwoofer does not contribute to

directional sound effects. Its optimum
position is on the floor against the wall.
The closer the subwoofer is to the
corner, the stronger the maximum
bass output. Alternately, it can be
placed on a shelf or other sites, but its
maximum output will be reduced.

provide strong directional and
surround effects.

The rear satellites may be installed

on their convenient floor stands (see
diagram B). When listening, the stands
should be positioned to the immediate
left and right of your listening
position. The stands are small enough
to be stowed underneath or alongside
a desk when not in use.

The rear satellites may also be

placed in any convenient sites
alongside the listener, including sites
slightly forward of the listening
location. The rear satellites do not
have to be at exactly the same height,
nor at the same height as the front
satellites. Try the extreme corners of a
desk using the desktop stands (C) or

5. Connect the Volume Control to the

subwoofer and then to the sound
card line outputs.

6. Connect the power supply adapter.
7. Listen to the system and adjust the

Subwoofer Level control for the
most pleasing bass output.

8. You may wish to experiment with

satellite placement briefly before
concealing the connecting wires
and making the installation more
permanent.

Summary of Contents for Four Point Surround FPS1000



















Reviews: