Using Sound Blaster Live! Value 19
E
N
GLIS
H
Configure an Instrument
To configure an instrument
1. In the SoundFont dialog, click the Configure
Instrument tab.
2. In the Select Bank list, select the bank whose
instruments you want to configure. You can select
any bank.
3. In the Select Instrument list, select the instrument to
configure.
In the Instrument Stack, you may see an instrument
entry although you did not load an instrument on
this page. The instrument can be found in a bank
loaded on the Configure Bank tab page.
4. Click the Load button and load a SoundFont or
single-instrument (for example, .WAV) file.
The last file loaded always appears at the top of the
Instrument Stack with an arrow pointing to it.
5. To clear an instrument from the stack, select the instrument and then click the Clear button.
6. For faster processing of SoundFont files, the files are loaded into memory. You need to set the
maximum amount of cache memory your SoundFont files can occupy, so that your system
performance does not suffer from insufficient memory. You can also set the caching algorithm for
a balanced system performance.
SBLIVEFM.book Page 19 Tuesday, April 10, 2001 10:45 AM