Configuring BlasterBoard Hardware 1-1
1
Configuring BlasterBoard Hardware
Before you install the BlasterBoard onto the system chassis, you may find it convenient to first configure
the BlasterBoard’s hardware including setting jumpers, installing memory modules, and attaching
components.
This chapter provides you with information regarding your PC-DVD Dxr3 upgrade
package.
Unpacking the
BlasterBoard
The BlasterBoard includes the following items:
❑
BlasterBoard and the device driver
❑
Slot 1 holder and AT cables
❑
User’s Guide
❑
CD audio cable
❑
Digital audio cable
The BlasterBoard is easily damaged by static electricity. Follow the precautions below while
unpacking or installing the BlasterBoard.
❑
Do not remove the BlasterBoard from its original package until you are ready to install it.
❑
Frequently ground yourself to discharge any static electric charge that may build up in your
body while working on installation and/or configuration. For example, you may ground
yourself by touching an unpainted portion of the computer’s metal chassis.
❑
Remove the BlasterBoard from its anti-static packaging and place it on a grounded surface,
component side up.
Set the CMOS Clear jumper to
Normal Mode before use. The
shipped BlasterBoard is set to
Clear CMOS and will not boot
the system. See “J7: CMOS
Clear Selector” on page 1-7.
M009-1.fm Page 1 Wednesday, May 19, 1999 1:32 PM
