Creative XP GlassRaven 4G Cloud, User Manual

Page: 16 / 44

16
Introduction
4. In Test mode, camera will automatically power off in 3 mins if there is no
keypad touching.
5. Don’t interrupt power supply during firmware upgrade, please deliver it
back to factory if the device doesn’t work after upgrading.
6. Do not frequently insert or pull out SD card and battery or plug in and out
the adaptor when the camera is on.
7. Do not have any floating objects, such as leaves, strings, or ribbons in the
3M motion detection zone of cameras, to avoid mistaking photograph.
8. Do not keep camera next to hot irrelevant objects, air conditioner exhaust
vents, and light, etc. to avoid mistaking photos.
9. Camera is with a 58° FOV lens and 60pcs IR LEDs. To ensure IR LEDs can
give enough flash that high quality AA batteries must be applied accordingly
to deliver enough amperage to power the illuminator consistently in dark
environments.
10. Camera functions best when 4 to 6’ off ground. Any lower the motion
sensor does not function well. Motion detection functions out and down - not
up and out.