Page 8
©
Copyright 2006, Creative Playthings. Printed in U.S.A.
19718-300 Rev C (05-20)
7 Ft. Swing Beam
ASSEMBLY INSTRUCTIONS
STEP 13 – Nameplate
Federal law requires that the name of the manufacturer be
permanently fastened to the gym, for identification in case
of recall or warranty claim. Your Swing Beam comes with a
nameplate. It is important to fasten the nameplate to the gym.
Use the spacing of the swings to determine placement. Fit
the nameplate at the center of the swing spacing. Use the
included #6 x 1/2" pan head screws to attach the name plate
to the Swing Beam.
IMPORTANT: When installing a Swing Beam to
a Norfolk or Manchester gym, do not install the
two swing hangers closest to the gym. The area
must be kept clear for tire swing clearance.
