background image

MODEL PS18EAS

19862-700 Rev A (07-20)

© Copyright 2014, Creative Playthings

Page 7

COMPONENT VIEW

X  9  33953-102  Deck Board 5/4 x 6 x 41-1/2"

Y  3  33954-102  Narrow Deck Board 5/4 x 4 x 38-5/8"

Z  2  33956-102  End Joist 5/4 x 6 x 22"

AA  1  33972-102  Ladder Slat 1 x 4 x 15-3/4"

AB  1  35664-102  Lower Wall Supp. 5/4 x 4 x 59-1/2"

AC  1  35665-102  Short Wall Supp. 5/4 x 4 x 23-1/4"

AD 12  33745-402  Roof Board 1 x 6 x 39-1/2"

AE  4  14202-400  1" Dia. X 15" Rung, Green

AF  2  32526-102  Climber Upright 2 x 3 x 52-3/4"

AG 12  33741-102  Short Wall Slat 1 x 4 x 19-1/2"

AH  5  33920-102  Rock Board 5/4 x 6 x 27"

AI*  2  33923-102  Swing Mount 2 x 3 x 34"

AJ  1  33924-102  Safety Rail 2 x 3 x 59-3/8"

AK  6  33962-102  Narrow Wall Slat 1 x 4 x 24-1/2"

AL  2  33963-102  Entrance Slat 5/4 x 6 x 24-1/2"

AM  1  35440-102  Rock & Rope Board 5/4 x 6 x 27"

AN  5  35449-102  Spacer Board 5/4 x 4 x 27"

AO  3  15034-100  Hand Grips

AP  1  18008-138  Climbing Rope

AQ* 5  36515-102  Ground Stake

AR  1  50428-400  Climbing Rocks (6)

AS  1  50469-100  Small CP Name Plate Pack

AT  1  8515-202 

8 Ft. Wave Slide, Green

A  4  32561-102  Angle Brace 2 x 3 x 17-1/4"

B  2  35663-102  Mid Post 2 x 4 x 32-1/2"

C  1  33760-102  Platform Right 2 x 4 x 59-3/8"

D*  1  33761-102  Platform Left 2 x 4 x 59-3/8"

E  2  33949-102  Sandbox End 5/4 x 6 x 41-1/4"

F  2  33950-102  Sandbox Side 5/4 x 6 x 59-1/2"

G  1  33951-102  Platform Front 5/4 x 6 x 41-1/2"

H*  1  33952-102  Platform Back 5/4 x 6 x 41-1/2"

I  1  33955-102  End Support 5/4 x 6 x 41-1/2"

J  1  33968-102  Front Arch 5/4 x 6 x 41-1/2"

K  1  35441-102  Left Wall Support 5/4 x 6 x 59-1/2"

L  1  35442-102  Right Top Support 5/4 x 6 x 59-1/2"

M  4  35443-102  Roof Upright 2 x 4 x 20-3/4"

N  1  40653-102  Post, Back Left

O  1  40654-102  Post, Back Right

P  1  40655-102  Post, Front Left

Q  1  40656-102  Post, Front Right

 

1  50568-701  PT Hardware Bag

 

1  50568-702  PT Screw Bag

 

1  50540-304  Instruction Pack, Eastport

R  1  33702-102  Ladder Rail Left 2 x 3 x 47-1/2"

S  1  33703-102  Ladder Rail Right 2 x 3 x 47-1/2"

T*  1  33732-102  Stringer 2 x 3 x 59-1/2"

U*  1  33742-102  Ceiling Joist 1 x 4 x 14-5/8"

V  6  33744-102  Rafter 2 x 3 x 31"

W  1  33922-102  Rock Wall Mount 5/4 x 6 x 39-1/2"

Take inventory of all parts, making sure nothing is missing or defec-

tive. If you find that parts are missing or defective call the Creative 

Playthings Customer Service Department at 1-800-598-4997.

BOX 2 (CONT'D)

BOX 2 - 60083-342

BOX 3 - 60083-343

* Not marked on Play Set View page.

BOX 1 - 60083-341

Summary of Contents for Playtime PS18EAS





















Reviews: