© Copyright 2014, Creative Playthings
MODEL PS18EAS
19862-700 Rev A (07-20)
Page 10
ASSEMBLY INSTRUCTIONS
STEP 4 — Left Sandbox Side:
Arrange the back tower assembly and front tower assembly
next to each other on edge as shown at right.
Fasten one Sandbox Side (F) to the Front Left and Back Left
Posts as shown at right. Use 1/4 x 3-1/2" Hex Bolt Assemblies
in the top holes and 1/4" x 2" Lag Screws with 1/4" Flat
Washers in the bottom holes.
STEP 5 — Left Platform Side:
Fasten the Platform Left (D) to the Back Left Post and Front
Left Post in the orientation shown using 1/4 x 3" Hex Bolt As-
semblies. Note the hole positions along the board.
O
E
H
I
N
1/4 x 4" Hex Bolts in
top holes, 1/4 x 2" Lag
Screws in bottom holes.
P
Q
STEP 3 — Back of Tower:
Fasten one Sandbox End (E) to the front of the Back Left
Post (N) and Back Right Post (O) as shown. Use 1/4 x 4"
Hex Bolt Assemblies in the top holes and 1/4" x 2" Lag
Screws with 1/4" Flat Washers in the bottom holes.
Repeat the process with the Platform Back (H) and End
Support (I). Align the hole circled in the illustration closer
to the bottom end of the tower.
O
N
1/4 x 3-1/2" Hex Bolts in
top holes, 1/4 x 2" Lag
Screws in bottom holes.
P
Q
F
Back of
tower
Front of
tower
1/4 x 3" Hex Bolts.
D
N
P
Back of
tower
Front of
tower
Note orientation
of holes
