Assembly
MODEL PS10FRA
19766-100 Rev B (05-10)
© Copyright 2010, Creative Playthings. Printed in U.S.A.
3DJH
ASSEMBLY INSTRUCTIONS
STEP 1 – Base Components:
Identify and separate all wood components, hardware, and
fasteners.
Identify and layout base components shown in the illustra-
tion at right.
STEP 2 – Corner Posts:
Fasten one Sandbox End (W) to one Left Corner Post (F)
using one 1/4" x 4" Hex Bolt Assembly.
$+H[%ROW$VVHP
-
EO\FRQVLVH[%ROWRQH/RFN:DVKHURQH)ODW
Washer and one Weld Nut.
Stand the assembly up and fasten the Gym Base Rail (A)
using a 1/4" x 2-1/2" Hex Bolt Assembly.
Note the Location of the pre-drilled holes in the Corner Post
and the Sandbox End in the illustration at right.
(Orient all Corner Posts so the hole 36" from the bottom is
offset toward the Sandbox Ends.)
1RWH$+H[%ROW$VVHPEO\FRQVLVH[%ROWRQH
Lock Washer, one Flat Washer and one Weld Nut.
STEP 3 – Base Assembly:
Fasten one Sandbox End (W) to the other Left Corner Post
(F) using one 1/4" x 4" Hex Bolt Assembly.
Stand the components up and fasten to the assembly from
step 2, using a 1/4" x 2-1/2" Hex Bolt Assembly.
F
W
A
A
W
W
F
A
W
AD
