PARTS
A 1 40587-102 4 Position Swing Beam Assembly (3 Position: 40586-102)
B 1 32620-102 Angle Brace 4 x 4 x 16-7/8"
C 1 32621-102 Gym Base Extension 2 x 6 x 45-3/16"†
D 1 32622-102 Gym Brace 4 x 4 x 99-3/8"†
E 1 32623-102 Base Rail Anchor 2 x 6 x 7-13/16" †
1 32702-102 Alt Base Rail Anchor 2 x 6 x 7-13/16" †
F 1 32625-102 Leg Brace 4 x 4 x 58"
G 2 40444-102 Leg Assembly 9 Ft. Swing Beam
H 1 14175-400 T-Bracket, Green
I 1 14176-400 Beam Retainer, Green
J 1 14162-400 8" L-Brace, Green
* 3 36515-102 Ground Stake 2 x 2 x 18"
1 50395-720 Hardware Bag, Swing Beam
1 50395-712 Hardware Bag, 5/16" Fasteners
1 50395-723 Hardware Bag, 9 Ft. Swing Beam
1 50395-714 Chain Bag, 9 Ft. Swing Beam
K 1 40311-400
Trapeze Assembly
L 3 40321-400 Sling Swing Assembly
M 10 14057-024 Chain 3/16 x 24", No Coating (in Hardware Bag)
This product is intended for use by ch
ildren from ages of 2 to12 800-598-
4997
Framingham, MA 01702
See the Gym Tower instructions for
information on proper ground cover.
The safe play zone for a 9 ft. Swing
Beam extends 18 feet to the front and
18 feet to the back of the swing beam.
Further safe play zone information can
be found in the Gym Tower instructions.
A
B
C
D
F
E
G
K
L
M
* Not pictured above
†
Not included in leg package 63076-303
I
J
H
All hardware on this set
is specially coated for
corrosion resistance.
If non-Creative Playthings
hardware is used, it MUST
be galvanized or stainless
steel.
Standard 9 Ft. 4 Position Swing Beam
63058-202
4 Pos. Swing Beam Assembly
63060-222
9 Ft. Legs & Brace
50546-777
3 Swings & 1 Trapeze
9 Ft. 4 Position Swing Beam (No Brace)**
63058-101
4 Pos. Swing Beam Assembly
63076-303
9 Ft. Legs
50546-777
3 Swings & 1 Trapeze
Standard 9 Ft. 3 Position Swing Beam
63061-101
3 Pos. Swing Beam Assembly
63060-222
9 Ft. Legs & Brace
AA934-204 2 Swings & 1 Trapeze
9 Ft. 3 Position Swing Beam (No Brace)**
63061-101
3 Pos. Swing Beam Assembly
63076-303
9 Ft. Legs
AA934-204 2 Swings & 1 Trapeze
Note: Instructions for mounting this
swing beam to a Norfolk gym with a
wood roof is on page 8. Instructions
for installation on a Manchester gym
is included in the Manchester manual.
The 9ft. Swing Beam will mount to a Yorktown, Ridgefield, Manchester or Norfolk
gym. It will also mount to a Lexington or Williamsburg with a wood roof. To mount the
9ft. Swing Beam to a Lexington or Williamsburg with a tent roof, the 9ft Swing Tent
Adapter (63035-102) is required.
** The 9 Ft. Brace Assembly is not required on a Manchester, Ridgefield, Yorktown,
or Norfolk gym. Use leg package 63076-303 for these gyms.
INSTRUCTIONS
9 FT. SWING BEAM
Parts for the optional Glider:
50545-555
Glider Bracket Pack
AA911-342
Chained Glider
Important: To comply with US federal law, mount the nameplate
and any provided warning plates to the play structure.
